How to manage local firewall rules using Plesk Firewall in Plesk for Linux

Dmitry Bystrov

10 months ago

Question

How to manage local firewall rules using Plesk Firewall in Plesk for Linux?

Answer

Note: If Plesk Firewall is not installed, install it using the steps from this KB article.

Note: Before enabling Plesk Firewall, disable firewalld via SSH if it is installed:

# systemctl stop firewalld && systemctl disable firewalld

In Plesk, go to Tools & Settings > Firewall > enable Firewall protection > click Apply. All predefined by Plesk rules that are required for Plesk functionality will be enabled.

Note: If a custom SSH port is used, after enabling Plesk Firewall it is required to add a rule for this custom SSH port to allow SSH connections. See the instructions below.

To add a new firewall rule, click on the + button.

Adding a custom rule in Plesk Firewall

Below is an example of adding a rule that will allow connections to custom SSH port 2222.

Click Add a firewall rule button.
Fill in the fields and click Save:
- Name of the rule: Custom SSH port
- Match direction: Incoming
- Action: Allow
- Ports: TCP 2222
- Sources: Specify IP addresses from which SSH connections will be allowed. In this example, SSH connections to a custom port are allowed from 203.0.113.2.
Click Apply Changes.

Managing firewall rules via a command-line interface

Use the /usr/local/psa/bin/modules/firewall/settings utility to manage Plesk Firewall in a command-line interface.

For a complete list of available options, run this help command:

# /usr/local/psa/bin/modules/firewall/settings --help

Below is an example of enabling Plesk Firewall:

Connect to a Plesk server via SSH in 2 separate SSH windows.
On the SSH windows A, enable the firewall:

# /usr/local/psa/bin/modules/firewall/settings -e
On the SSH window B, confirm the changes within 60 seconds:

# /usr/local/psa/bin/modules/firewall/settings --confirm

All predefined by Plesk rules that are required for Plesk functionality will be enabled.

Below is an example of adding a new rule with the name "My rule" which will deny incoming connections from 203.0.113.2 on ports 2222/tcp, 2222/udp:

Connect to a Plesk server via SSH in 2 separate SSH windows.
On the SSH window A, create a new rule and apply it:

# /usr/local/psa/bin/modules/firewall/settings -s -name 'My rule' -direction input -action deny -ports '2222/tcp,2222/udp' -remote-addresses "203.0.113.2"

# /usr/local/psa/bin/modules/firewall/settings -a
Back to the SSH window B, confirm the changes within 60 seconds:

# /usr/local/psa/bin/modules/firewall/settings -c

0 Shares